Inergize Elite Cold Plunge Tub | 37°F–104°F | 0.8HP Compressor | Quad Filtration | App Control
Choose options
Overview
The Inergize Elite Cold Plunge Tub is a dual-temperature water immersion system designed for both cold and warm water use. It features a 0.8HP compressor, a temperature range of 37°F to 104°F, quad-step water filtration, and app-based controls through the Tuya Smart platform.
The system combines a compact chiller unit with a drop-stitch insulated tub. The chiller provides cooling and heating functions, while the tub features 4-inch walls, UV-resistant construction, a code-lockable lid, and stainless steel drain valves.
The Inergize Elite operates on a 120V / 60Hz / 15A dedicated grounded circuit and includes built-in wheels and handles on the chiller for easier positioning.
Key Features
- Dual Temperature System – Supports adjustable water temperatures from 37°F to 104°F.
- 0.8HP Compressor – Equipped with a 0.8HP compressor for cooling and heating operation.
- Cooling Performance – Manufacturer-listed cooling rate of approximately 7.6°F per hour, with approximately 3 hours to reach cold plunge temperature from fill.
- Heating Performance – Manufacturer-listed heating rate of approximately 8.5°F per hour, with approximately 2.5 hours to reach hot water temperature from fill.
- Quad-Step Filtration – Includes an air intake filter, 20-micron filter, built-in strainer, and ozone water-treatment system.
- 167 mg/hr Ozone Output – Integrated ozone system with a manufacturer-listed output of 167 mg/hr.
- Tuya Smart App Control – Supports remote control, scheduling, and ozone cycle settings through the Tuya Smart app.
- LED Control Panel – Includes an LED control interface directly on the chiller.
- 4-Inch Insulated Walls – Drop-stitch tub construction with 4-inch walls.
- Code-Lockable Lid – Includes a lockable lid designed to cover the tub when not in use.
- Stainless Steel Drain Valves – Two stainless steel ball valves are included for drainage and filter maintenance.
- Built-In Mobility Features – Chiller includes wheels and handles for positioning.
- 120V Operation – Designed for connection to a dedicated 120V / 15A grounded circuit.
Chiller Specifications
- Compressor: 0.8HP
- Temperature Range: 37°F–104°F
- Cooling Speed: 7.6°F per hour
- Heating Speed: 8.5°F per hour
- Cooling Capacity: 2,230W / 7,613 BTU/hr
- Heating Capacity: 2,505W / 8,546 BTU/hr
- Flow Rate: 348 GPH
- Water Turnover: Approximately 3× per hour
- Ozone Output: 167 mg/hr
- Noise Level: Approximately 65 dB during active cooling; near-silent at idle
- Filtration: Air intake filter, 20-micron filter, built-in strainer, ozone water-treatment system
- Casing: Powder-coated matte black CNC casing
- Chiller Dimensions: 24" L × 12" W × 18" H
- Chiller Weight: 85 lbs
- Mobility: Built-in wheels and handles
- Hose: Braided and reinforced hose with metal connections
Tub Specifications
- External Dimensions: 53" L × 29.5" W × 30" H
- Internal Dimensions: 45" L × 21.5" W × 30" H
- User Capacity: Designed for users up to 6'5" and 300 lbs
- Wall Thickness: 4"
- Material: Drop-stitch construction
- Material Features: UV-resistant and insulated construction
- Lid: Code-lockable
- Drain Valves: 2 stainless steel ball valves
Filtration System
The Inergize Elite includes four filtration and water-treatment components:
- Air Intake Filter
- 20-Micron Filter
- Built-In Strainer
- Ozone Water-Treatment System
The ozone system has a listed output of 167 mg/hr. The system also provides a flow rate of 348 GPH, with approximately three water turnovers per hour.
App & Controls
The system can be operated using the built-in LED panel or the Tuya Smart app on compatible iOS and Android devices.
App functionality includes:
- Remote temperature control
- Scheduling
- Ozone cycle control
Power & Operating Requirements
- Power Consumption: 890W
- Power Supply: 120V / 60Hz / 15A
- Circuit: Dedicated grounded 15A circuit
- Outdoor Rating: IPX4
- Operating Ambient Temperature: 33°F–115°F
Electrical installation should follow the manufacturer's requirements and applicable local electrical codes.
Who It's For
The Inergize Elite Cold Plunge Tub is designed for homeowners and users looking for a dual-temperature cold plunge and hot water system with adjustable temperature settings, integrated filtration, ozone water treatment, app connectivity, and an insulated drop-stitch tub. Its 120V operation and built-in chiller mobility features make it suitable for installations where the specified electrical and environmental requirements can be met.
WELLNESS DISCLAIMER
The products sold by Restorations Peak are intended for general wellness, relaxation, fitness, and recovery purposes only. They are not medical devices and are not intended to diagnose, treat, cure, or prevent any disease or medical condition. The information provided on this website, including any product descriptions, benefits, or suggested uses, is for informational purposes only and does not constitute medical advice. Individual results may vary. Any health or wellness benefits referenced are based on general use and are not guaranteed.
Before using any equipment purchased from this site—including but not limited to saunas, sauna heaters, hot tubs, cold plunges/ice baths, or fitness equipment—you should consult with a qualified healthcare professional, especially if you are pregnant, nursing, have a cardiovascular condition, an implanted medical device (such as a pacemaker), epilepsy, diabetes, or any other pre-existing medical condition.
Do not use these products if you are under the influence of alcohol or medications that impair your balance, judgment, or ability to sense heat, cold, or pain. Always follow the manufacturer's safety guidelines, installation rules, and usage instructions included with your product. Restorations Peak is not liable for any injury, adverse reaction, or health outcome resulting from the use or misuse of products purchased through this website. Use all products responsibly.